35 / 48
PL
SK
DE
EN
CS
HU
MAINTENANCE AND STORAGE
CAUTION! A
To ensure proper functioning of the machine, it is necessary to have it checked and
adjusted by qualified personnel in an authorized service centre at least once a year.
Good maintenance is essential for safe, economical and trouble-free operation.
Failure to properly follow maintenance instructions and precautions can cause you to be seriously
hurt or killed. Always follow the procedures and precautions in this owner‘s manual.
WARNING! B
Prior to any work on the machine (maintenance, inspection, replacement of
accessories, servicing) or before storing it, ALWAYS SWITCH THE ENGINE OFF, wait
for all moving parts to stop and allow the machine to cool down. Prevent the engine
from being started accidentally (disconnect the spark plug / disconnect the power
unit from the mains / if the machine is equipped with a trigger key, remove it).
THIS WARNING IS NOT REPEATED IN ANY FOLLOWING POINTS!
• Always make sure that all nuts and bolts are firmly tightened and make sure the machine is
in good working order.
• Keep the machine in good condition, if necessary change warning and instruction labels on
the machine.
• Always ensure that the ventilation openings are kept clear of debris.
• For safety reasons, replace worn or damaged parts. Only use original spare parts and
accessories. Parts not tested and approved by the equipment manufacturer can cause
unforeseeable damage.
• Repair and maintenance work other than described in this section, which are more
complicated, or it needs special tools, let it on our authorized service.
INSTRUCTIONS FOR MACHINE MAINTENANCE
• Frequently check the collection basket for wear or damage.
• Always be careful when adjusting the machine to avoid jamming fingers between moving
blades and rigid machine parts.
• If you’re repairing a blade, be aware that even though the power supply is switched off,
the blades can still be moving.
• Regularly check the blade for damage.
CLEANING
CAUTION! A
Never spray the product with water or expose it to water.
1. Carefully clean the machine after each use.
To Next Page
Loading...
