relate to emissions (for example breathing in).
• Danger of fire or explosion relate to spilling of fuel.
• Dangers caused by failing in ergonomic principles by construction of the machine, for example
dangers caused by unhealthy position of body or excessive overcharge and unnature to the
anatomy of the human hand-arm, relate to construction of handle, equilibrium of the machine
and using of toothrest.
• Dangers caused by unexpected starting, unexpected exceeding of engine revs caused by defect/
failure of control system, relate to the defects by the handle and placing of drivers.
• Dangers caused by impossibility to stop the machine in best conditions, relate to solidity of the
handle and placing of engine shut down device.
• Dangers caused by defect of machine control system, relate to solidity of the handle, placing
of drivers and marking.
• Dangers caused by tearing (of the chain) during running.
• Dangers caused by shooting up of subjects or splashing of liquids.
UNPACKING
• Carefully remove the product from the box.
• Carefully inspect all parts. If any part is damaged or missing, contact your dealer or authorized
service center.
• Do not throw away packaging materials until you have not reviewed carefully if they did not
remain a part of the product.
• Parts of the packaging (plastic bags, paper clips, etc.) do not leave within reach of children,
could be a possible source of danger. Do not let children play with plastic bags, foils or small
parts. There is a danger of swallowing or suffocating!
• Disposal must be made in accordance with the regulations in force in the country in which the
equipment was installed.
• Make sure that bags and containers of plastic material are left strewn freely in the environment
because they pollute it.
• If you have any doubt do not use the machine, but have it checked by an authorized service
center.
PACKAGE CONTENTS
1x lawn mower body, 1x two-part adjustable handle with quick screw, 1x grass catcher, 1x
mulching wedge, 1x discharge channel, 1x spark plug wrench, 1x battery charger (only Hecht
5534 SWE), 1x manual for use
ASSEMBLY
The lawn mower is delivered unassembled. The complete push bar, the grass catcher and the
wheels must be assembled before using the lawnmower. Follow the operating instructions step-
by-step and use the pictures provided as a visual guide to easily assemble the machine.
FOLDING HANDLE
1. Use the knob with wing nut and with washer to fix the lower handlebars into the mower
body (fig. 2).
2. Lift the two locking levers to release the upper handlebars for folding (fig. 3A).
3. Push the locking lever closed to lock the handlebars (fig. 3B, C) in the operating position
To Next Page
Loading...
