39 / 46
- Check the tightness of all screws and nuts.
- If the chainsaw is filled with chain bio-oil, the unused oil must be removed from the tank
and replaced with mineral oil and the chainsaw must be run for a while until all bio-oil
is sprayed into the bar.
- Let the engine cool down.
- Then fully empty the fuel tank.
- Empty the primer by pressing it several times (until you cannot see petrol). Then try
to start the chainsaw in a regular way. If the engine starts up, keep it running until all
the fuel is used up. If it does not start, crank it idly several times.
- Switch the ignition switch to 'STOP'.
- Install the bar guard.
- Store the chainsaw with the handle up in a dry, dust-free place. Always out of reach of
children and unauthorized persons.
- When the chainsaw is put out of operation, oil can leak from the oil tank – this is not
a malfunction.
FUEL STORAGE
• Do not store fuel mixed as the mixed fuel quickly degenerates. Always prepare only
the amount of fuel that can be consumed while working.
• Only store petrol and oils in canisters and containers designed for this purpose. Using other
containers may cause petrol contamination or explosion.
TRANSPORT
• Carry and transport the chainsaw only with the engine switched off and the brake activated/
locked, by the front handle and the bar backwards.
• During the chainsaw transport and carrying over long distances, it is necessary to let
the engine cool down and use the bar guard. Never transport the chainsaw without
the guard!
• Ensure that the oil and petrol is not spilled when transporting over short distances.
• Both tanks must be emptied when transporting over long distances.
CAUTION! A
Always use the guide bar guard during transport or storage.
SERVICE AND SPARE PARTS
• In the event of a fault, we recommend having this product repaired by an authorised service
centre, which uses only identical spare parts. You will maintain both the product’s safety
and its performance.
• For technical assistance, repair or to order original spare parts, we recommend that you
always contact the nearest HECHT authorised service centre.
• Information on service locations, visit www.hecht.cz
• When ordering spare parts, please quote the part number, this can be found at
www.hecht.cz
HECHT_925_R_MANUAL_2022_EN.indd 39HECHT_925_R_MANUAL_2022_EN.indd 39 28.03.2023 11:58:0428.03.2023 11:58:04
To Next Page
Loading...