Heidelberg Engineering SPECTRALIS User Manual

1 Preface
This user manual serves as a reference guide for optional
accessory modules from Heidelberg Engineering. Read the entire
user manual to gain a full understanding of the software and/or the
hardware components. It is not necessary to read all the chapters
in chronological order. Begin with a topic of interest. Follow the
links and references included in the text for guidance to other
chapters.
If you have any further questions on the SPECTRALIS software,
hardware specifications, or HEYEX please refer to the following
applicable documents (° “Applicable documents”, p. 5):
Applicable documents
Article No. Revision Document Content
230131 006 et seq. SPECTRALIS Product Family
User Manual
In this document, you will find all information
on how to operate your SPECTRALIS device
safely.
230006 010 et seq. SPECTRALIS Hardware
Manual
In this document, you will find all information
on the hardware and software, setting up the
device, electrical safety, cleaning and
disinfection, disposing of the device, and
technical specifications.
230088 003 et seq. HEYEX User Manual In this document, you will find all information
on HEYEX.
Please have this document on hand if you are
working with HEYEX version 1.10.
230111 006 et seq. HEYEX 2 User Manual In this document, you will find all information
on HEYEX 2.
Please have this document on hand if you are
working with HEYEX 2 version 2.5.1 or higher.
230005 005 et seq. SPECTRALIS Accessories
Hardware Manual
In this document, you will find all information
on hardware for the Anterior Segment Module,
the Widefield Imaging Module, the High
Magnification Module and the Ultra-Widefield
Imaging Module.
1.1 Symbols Used in this Document
This chapter describes the definitions, formatting, and symbols
used in this document.
Keys are identified by their symbol, for example + .
The code of, for example, the heyex.ini file is identified by
monospaced typeface, for example DefaultDevice=1.
Elements of the graphical user interface such as buttons, window
names, or file names are identified by quoted “italic” font, for
example “Next” .
Keys
Code
Elements of the graphical user
interface
Preface
Symbols Used in this Document
1
© Heidelberg Engineering GmbH, Article No. 230134-002 INT
5

Heidelberg Engineering SPECTRALIS Specifications

General

Brand	Heidelberg Engineering
Model	SPECTRALIS
Category	Control Unit
Language	English