Heidelberg Engineering SPECTRALIS User Manual

6 Viewing Images
Please note that no absolute measurements of
physical dimensions are possible in Ultra-
Widefield images
If you use the “Measure Distance” , “Draw Region” ,
and the “Measure Circle” overlays, all values will be
displayed in pixels. For further information on
overlays, please refer to the SPECTRALIS Product
Family User Manual.
Fig. 7: Analysis window
For images acquired with the SPECTRALIS Ultra-Widefield
Module, all viewing functions are available that are also offered for
images acquired with the SPECTRALIS standard objective lens.
For further information on viewing functions and analysis options,
please refer to the SPECTRALIS Product Family User Manual.
Viewing Images
6
© Heidelberg Engineering GmbH, Article No. 230134-002 INT
31

Heidelberg Engineering SPECTRALIS Specifications

General

Brand	Heidelberg Engineering
Model	SPECTRALIS
Category	Control Unit
Language	English