HEIDENHAIN iTNC 530 Programming Station 3
TNC Model, Software and Features
This manual describes functions and features provided by the TNC
programming station as of the following NC software numbers.
The programming station software is fully compatible with the TNCs
listed below.
Many machine manufacturers, as well as HEIDENHAIN, offer
programming courses for the TNCs. We recommend these courses as
an effective way of improving your programming skill and sharing
information and ideas with other TNC users.
TNC model NC software number
iTNC 530 programming station 340 494-05
TNC model NC software number
iTNC 530 340 490-05
iTNC 530 (export version) 340 491-05
iTNC 530 with Windows XP 340 492-05
iTNC 530 with Windows XP (export
version)
340 493-05
User documentation:
All TNC functions are described in the User’s Manuals for
the iTNC 530. Please contact HEIDENHAIN if you need a
copy of these User’s Manuals. Have your NC software
number handy. It is shown on the iTNC’s MOD screen.
The user documentation is also available as online help,
which can be called with the HELP key of your
Programming Station.
If you have purchased the complete version of the
programming station, you will find all the user
documentation on the TNCguide DVD included in delivery.
To Next Page
Loading...
