Setting the conversational language
The default language for the programming station software is German.
Follow the procedure below to switch to another conversational
language:
U Start the programming station software
U Select the Programming and Editing mode of
operation
U Select MOD functions
U Enter the code number 123 and confirm with the ENT
key
U To select machine parameter 7230: Press the GOTO
key, enter 7230, and confirm with the ENT key
U Set the desired conversational language (see the table
below), and confirm with the END key
Conversational language Value from MP7230
English 0
German 1
Czech 2
French 3
Italian 4
Spanish 5
Portuguese 6
Swedish 7
Danish 8
Finnish 9
Dutch 10
Polish 11
Hungarian 12
Russian 14
Chinese (simplified) 15
Chinese (traditional) 16
Slovenian 17
Norwegian 18
Slovak 19
To Next Page
Loading...
