50
2.2 Connecting the Programming Station
Working with the HEIDENHAIN basic PLC
program
After you have started the programming station with active PLC, the
TNC displays the 98 TNC programming station active error message.
U Press the HELP key to display a list with the most important
programming station functions for machine operation
The following table lists these functions:
Use the mouse in combination with the vertical soft-key row to
simulate various machine functions of the basic PLC program:
Function Keys
NC start CTRL+S
NC stop CTRL+X
Move the active axis in the positive
direction
CTRL+Arrow up
Move the active axis in the
negative direction
CTRL+Arrow down
Emergency stop ALT+X
Soft key Keys
N NC start
NC stop
Move axes in positive and
negative direction
Exit the programming
station
S Spindle ON
Spindle OFF
Incremental spindle jog
M3
Incremental spindle jog
M4
Oriented spindle stop M19
T Acknowledge tool change
Clamp/release tool
DIAGNOSIS Show PLC error table
Diagnostic functions
Status functions
Documentation for M
functions
To Next Page
Loading...
