9HEIDENHAIN TNC 426 B, TNC 430
You can choose between several additional status displays with the
following soft keys:
Shift the soft-key rows until the STATUS soft
keys appear.
<
Select the desired additional status display,
e.g. general program information.
General program information
Name of main program
Active programs
Active machining cycle
Circle center CC (pole)
Operating time
Dwell time counter
Positions and coordinates
Position display
Type of position display, e.g. actual positions
Tilt angle of the working plane
Angle of a basic rotation
1.4 Status Displays
Dkap1.pm6 30.06.2006, 07:039
www.EngineeringBooksPdf.com
To Next Page
Loading...
