37HEIDENHAIN TNC 426 B, TNC 430
Confirm with the EXECUTE or with the ENT key. A status
window appears on the TNC, informing about the copying
progress, or
If you wish to transfer more than one file or longer files,
press the PARALLEL EXECUTE soft key. The TNC then copies the
file in the background.
<
To stop transfer, press the TNC soft key. The
standard file manager window is displayed
again.
Selecting one of the last 10 files selected
Calling the file manager
<
Display the last 10 files selected: Press LAST
FILES soft key
Use the arrow keys to move the highlight to the file you wish to
select:
Move the highlight up or down.
<
or Select a file: Press the SELECT soft key
or ENT
4.3 Standard File Management
Ekap4.pm6 30.06.2006, 07:0337
www.EngineeringBooksPdf.com
To Next Page
Loading...
