21
Disassembly and Storage
Disassembly and Storage
Dismantling, transportation and storage
Dismantling
Warning:
Risk of injury!
While the unit is plugged in you are at harm if the rotation is
accidently switched to ON mode.
Prior to dismantling always disconnect the plug from the electrical
socket.
✓ The unit is switched off.
➜ Disconnect the power cord from the plug on the unit.
➜ Eventually dismantle the shaft guard.
➜ Remove the impeller.
Transportation and storage
➜ Store and transport the unit and its components only if they were emptied and
cleaned in the original packing material.
➜ Alternatively store and transport the unit in a container which prevents damages
during transportation.
➜ Seal the packing carefully against unauthorized or mistaken opening.
➜ Store the unit in a dry place.
Improper transportation may result in damages to the system and
the mechanical components.
Avoid any kind of shocks during transportation.
To Next Page