Safety Instructions
6
Safety Instructions
General safety instructions
EC Declaration of Conformity
This device complies with the following EG-Directives*:
▪ 2006/42/EC Machinery Directive
▪ 2014/35/EU Low-Voltage Directive
▪ 2014/30/EU Electromagnetic Compatibility Directive
*Also see attachment “EC Declaration of Conformity”.
The device has been constructed according to state-of-the-art technology and recognized
safety regulations. However, risks may still arise during installation, operation and
maintenance.
➜ Please ensure the operating instructions are available at all times.
The device may only be used under the following circumstances:
➜ Only operate the device, if it is in full working order.
➜ Ensure all operators of the device possess the necessary safety and risk awareness.
➜ Operate the device according to the instructions stipulated in this manual only.
➜ If there is something you do not understand, or certain information is missing, ask
your manager or contact the manufacturer.
➜ Do not do anything on the device without authorization.
➜ Only use the device according to its intended use.
Intended use
The device is intended for use by trained and authorized personnel only.
The device is suitable for the
following use:
▪ stirring
▪ mixing
▪ blending of solvents and/or solids
The operation for the device
is suitable in one of the
following locations:
▪ in any research application
Improper use
Any use which deviates from the devices intended use is considered to be improper. The
manufacturer does not accept liability for any damages resulting from non-permitted
uses. The risk is carried by the operator alone.
To Next Page
Loading...
