Heinner HHPD-80A++ - IX. ALARM FUNCTION; Alarm indicators and troubleshooting

www.heinner.com
27
WARNING:
1.Empty the water container after each use. The program will be paused and the “ ” icon will flash if the water
container is full during the drying process. After the container emptied, the dryer can be restarted by pressing 【
Start/Pause】 button.
2.Do not drink the condensed water.
3.Do not use the dryer without the water container.
IX. ALARM FUNCTION
Display
Reason
Solutions
“ ”is flashing
Container is full
Empty container
Water pump failure or water level
sensor failure
Please contact your local
service center if the
problem persists
“E32”
Humidity sensor failure
“E33”
Temperature sensor failure
“ ”is flashing
Filter is plug up or environment
temperature is too high
Clean filter and confirm
the
ambient temperature
Please contact your local
service center if the
problem persists