Heinner HHPD-80A++ - XIII. PRECAUTIONS; Troubleshooting common problems

www.heinner.com
34
XIII. PRECAUTIONS
Only authorised technicans can carry out repairs.
Before you call customer service, please check if you can deal with the fault by yourself or if you have
followed the user instructions.
A technician will charge you for advice, even during the warranty period.
Problem
Solution
Display does not light up
Check if the main plug is inserted.
Check if a program is selected.
Check the main power supply.
Dryer does not start
Check if the start button is pushed.
Check if the door is entirely closed.
Door is open by itself
Press door until it “clicks” into position.
Ensure that you have not overloaded the drum.
Degree of dryness is not reached or
drying time too long
Clean the filter door and filter base.
Use the appropriate program.
Keep the air inlet clear.
If you cannot deal with the fault by yourself and need help:
1.Press the 【On/Off】button.
2.Pull out the mains plug and call the service center.