HELI OPSM - Inspections before Operations; Inspections after Operations

Charger output voltage: 24V
Charger output current: 25A
7. Inspections before operations:
In order to ensure safe operations and keep the truck in a good condition, full inspections shall be
carried out before operations, which is a legal duty. If any problem is discovered, please contact our sales
department.
7.1 Check point and check content:
NO.
Check point
Check content
1
Brake clearance
The brake clearance shall be kept
between0.2-0.8mm.
Steering
system
2
Operation handle
Degree of tightness and flexibility of
turning.
3
Oil pipe
Leak or not.
4
Hydraulic oil
Proper amount of oil.
5
Lifting oil cylinder
Leak or not.
Wheel
6
Pins, screws and all
fasteners
If any pin, screw and fastener of each
wheel becomes loose or falls or not.
7
Wearing condition
Compared with parameter list, replace the
wheel if the diameter has reduced by 5%.
Storage
battery
8
Charging
Check battery capacity indication.
9
Connecting wire
The connecting wire and socket should be
firm.
Horn
10
Horn
Whether the horn honks after horn button
ispressed.
Instrument
11
Function
Turn on electric lock switch to see whether
instrument display is normal.
Others
12
Truck frame and other
structural parts
Have damage or cracking or not.
13
Function
Lifting/lowering, travelling
forward/backward, turning left/right and
other movements are normal or not; any
abnormal sound or not.
8. Inspections after operations:
After work is completed, wipe out dirt on truck, and inspect the truck in the following aspects:
Keep all the warning signs, nameplates, warning plates and other image-text information complete and
clear. Such image-text signs have a certain guidance, reminder and warning for the operators.
Check if there is any deformation, distortion, damage or breaking condition.
Add lubrication oil according to the actual situation.
Replace faulted spare parts.
10