This manual is the main technical document for safe operation, maintenance and upkeeping for low
level order picker (hereinafter referred to as “order picker”). It mainly includes the order picker’s structural
characteristics, working principles, technical characteristics, operations, precautions, common faults and
troubleshooting, maintenance requirements, transportation and storage and so on. For operators of the
order picker, before using it, please read this operation manual carefully, and operate, maintain and upkeep
it strictly according to the requirements specified in this manual in order to ensure that the order picker can
work reliably and efficiently, and to achieve the greatest economic benefits of the order picker.
Before using the order picker, operators should read this manual carefully, and be trained on it to get
familiar with all the operaion procedures, and get fully acquainted with the technical performance of the
truck. Otherwise, due to improper operations, the truck will be disabled to achieve its performance; besides,
its service life may be shortened and even accidents may occur.
Brief Introduction:
This order picker is a self-propelled high altitude order picking device, mainly used for material picking
operations in narrow places such as warehouse with shelves below 5m and narrow-aisle warehouse. The
truck is designed to reduce the intensity of labor and improve the safety and efficiency of work,
characterized in that:
It has functions of lifting/lowering, travelling, steering, braking and so on; it has small size in outline,
capable of flexible operations.
It is powered by storage battery and driven by motor with small vibration and low noise, without pollution to
environment.
It adopts mast-type lifting mechanism which has high strength and good guidance quality and stability,
capable of stable lifting and lowering. The load platform has a large area with low retrieve height,
convenient for people and cargo to get on/off.
The travelling and braking systems are controlled interconnectedly, successfully avoiding dangerous working
conditions caused by maloperations.
Service environment:
The altitude shall not exceed 1000m;
Ambient air temperature shall be between -25℃and 40℃;
When the ambient temperature is 40℃, the relative humidity should not exceed 50%; at a lower
temperature, greater relative humidity is allowed;
For hard and flat ground;
Never use this truck in a flammable or explosive environment or corrosive environment with acid or alkali.
Instructions:
Truck operators shall keep this manual and read it carefully for several times;
This manual includes correct operations, easy maintenance and routine inspections;
Please read this manual carefully before operations in order to ensure safe and efficient operating
through correct driving and proper maintenance;
Due to product improvement, content of this manual may be different from the actual trucks;
When rent or transfer a truck, please rent or transfer this manual along with it;
Please contact our sales department if you have any question.
Instructions of labels: these labels contain information vital for safety of you and others; please conform to
them
To Next Page
Loading...
