5. Maintenance
5.1 Cleaning
To ensure optimal performance and lifespan of the lamp it is important to clean regularly. If you see
a build up of dirt or residue anywhere on the MITRA lamp, this needs to be cleaned.
To clean the MITRA most effectively please follow these simple steps.
1. Make sure the xture is turned off and not connected to the mains power.
2. Light dust and dirt can be cleaned with low-pressure compressed air.
3. More heavily polluted xtures could be cleaned with a soft cloth using water and soap.
4. Wipe everything dry, or let the xture dry fully by itself before reconnected to the mains
power.
DO NOT(!) disassemble the MITRA lamp in order to clean it, it is not necessary, and
disassembling it will invalidate your warranty.
5.2 Disposal
This symbol on the product(s) and / or accompanying documents means that used
electrical and electronic products should not be mixed with general household waste.
For proper treatment, recovery, and recycling, please take this product(s) to designated
collection points where it will be accepted free of charge.
Disposing of this product correctly will help save valuable resources and prevent any potential neg-
ative effects on human health and the environment, which could otherwise arise from inappropriate
waste handling.
Please contact your local authority for further details of your nearest designated collection point.
Penalties may be applicable for incorrect disposal of this waste, in accordance with your national
legislation.
www.heliospectra.com
22