Helmer iPF125 - i.Series Operation; Initial Power-Up

Helmer Scientic i.Series
®
and Horizon Series
™
Freezer - Upright Operation Manual
360369/A 9
3 i.Series
®
Operation
3.1 Initial Power-Up
1. Plug the power cord into a grounded outlet that meets the electrical requirements on the product specication label.
2. Turn the AC power switch ON.
3. Turn the Back Up battery switch ON.
Notes
• For models equipped with optional Access Control, the back up battery is turned ON with a key switch.
• The Start screen is displayed when the i.C
3
is powered on. The i.C
3
will take approximately 2-5 minutes to boot up.
Start screen
The language screen is displayed when the i.C
3
is powered on. Use the Language screen to select the i.C
3
display language.
Language screen
Note
English is the default language.
i.Series Operation