Helmer iPR120 - i.Series Operation; Initial Power-Up

Helmer Scientic i.Series
®
and Horizon Series
™
Refrigerator - Upright Operation Manual
360372/B 10
3 i.Series
®
Operation
3.1 Initial Power-Up
1. Plug the power cord into a grounded outlet that meets the electrical requirements on the product specication label.
2. Turn the AC power switch ON.
3. Turn the Back-up battery switch ON.
Notes
• For models equipped with optional Access Control, the back-up battery is turned ON with a key switch.
• The Start screen is displayed when the i.C
3
is powered on. The i.C
3
will take approximately 2-5 minutes to boot up.
Start screen
The language screen is displayed when the i.C
3
is powered on. Use the Language screen to select the i.C
3
display language.
Language screens
Note
English is the default language.
If an alarm sounds, temporarily mute the alarm by touching the Mute button.
Home screen - alarm muted Mute icon
Note
Active alarms are displayed on the Home screen. If an alarm condition other than High Temperature occurs, refer to the
service manual for troubleshooting.
i.Series Operation