Helmholz REX 100 WiFi - Page 10

Quick Start Guide REX 100 WAN | WiFi
10
4.3.2 Step 2 “Internet” – Network settings
In step 2, the network conguration for the LAN and mobile WAN side of the device
is dened.
- LAN All REX 100 routers come with the IP address 192.168.0.100/24 as a
default. Modify the IP address and the subnet mask in keeping with the
machinery network.
- WAN Here the data are entered for the WAN connection (company network
for the machine) – DHCP or static IP address.
The corresponding data provides you with the responsible network
administrator.
- WiFi Enter the WiFi-specic access data (only 700-875-WIF01).
The corresponding data provides you with the responsible network
administrator.
4.3.3 Step 3 “Conguration” – Transfer of the conguration
The minimal conguration is now complete and must be transferred to the REX 100.
The conguration is downloaded with a click on the download button and can be
transferred with a FAT-formated USB stick to the REX router. This step is described in
chapter 5.1 (page 12).