Helmholz REX 100 WiFi User Manual

Quick Start Guide REX 100 WAN | WiFi
11
5. Router conguration transfer options
The created device conguration can be transferred to the actual REX 100 unit in a
variety of ways.
- 1. Download conguration to the PC (via USB stick)
The conguration le is saved on the PC and can subsequently be transferred to
the REX 100 using a USB stick (subsequent procedure in chapter 5.1).
- 2. Transfer conguration to the device (LAN connection – only possible via
shDIALUP)
The conguration is transferred via a local LAN connection from the PC on which
shDIALUP is installed to the device.
You can select this procedure if the REX 100 can be reached directly through the
local network (LAN).
- 3. Synchronization (retroactive changes)
When the router has already been congured and a connection with the portal
established, any change to the conguration can be carried out via the existing
VPN connection (subsequent procedure described in chapter 5.2).
For purposes of simplication, only the transfer via USB stick (point 1) is explained
in this Quick Start Guide, and how retroactive changes can be transferred via the
function “Synchronization” (Point 3).

Helmholz REX 100 WiFi Specifications

General

Brand	Helmholz
Model	REX 100 WiFi
Category	Network Router
Language	English