Helmholz REX 100 WiFi - Page 12

Quick Start Guide REX 100 WAN | WiFi12
5.1 Transferring the con guration using a USB  ash drive
Prerequisites for this are:
- A PC with USB connection
- An Internet connection with the myREX24 V2 portal
- A FAT-formated USB stick
In the myREX24-V2 portal, select the “Download con guration to PC” option in the
device settings.
Download the con guration  le provided by the myREX24 portal to your PC and
save it on a FAT-formated USB stick.
The  le is called myrex24.mbn for the initial commissioning of the REX 100.
All of the following con guration  les generated for this router are automatically
generated by the system as myrex24.mbnx.
Do not rename this  le.
Now carry out the steps described on page 21 in chapter 11 “Load con guration/
 rmware update from the USB stick”.