Need help?Do you have a question about the Helmholz REX300 and is the answer not in the manual?
General| Product Name | REX300 |
|---|---|
| Manufacturer | Helmholz |
| Category | Network Router |
| Mounting | DIN rail |
| Protection Class | IP20 |
| Protocols | SNMP |
| USB Port | USB 2.0 |
| Operating Temperature | -20…+60 °C |
| WAN Interface | 1x 10/100 Mbps |
Instructions for preparing the REX 300 unit for operation.
Steps to create a router configuration using the myREX24 portal.
Guide to registering for a myREX24 account and downloading software.
Instructions for logging into the myREX24 portal.
Details on configuring the router within the myREX24 portal.
Setting up network and internet parameters for the REX 300.
Configuring WAN and VPN settings for the REX 300.
Overview of methods to transfer router configuration.
Detailed steps for transferring configuration via LAN.
Explains the CTM for transferring configurations via internet.
Setting up internet connection using the First Start website.
Steps for establishing internet connection with an internal modem.
Configuring internet connection for WAN routers via First Start.
Finalizing the First Start configuration steps.
How the router automatically downloads configurations from myREX24.
Overview of the router's connection status and configuration data.
How to change configuration using the CTM after initial setup.
Copying configuration file to USB flash drive.
Device boot process and initiating configuration transfer via USB.
Steps to establish VPN and transfer IP packages.
Useful tips and troubleshooting for myREX24 portal connection.
Configuring VCOM LAN for serial communication.
Adjusting virtual COM port settings.
Checking the status of VCOM LAN connections.
Setting up the REX 300 without the myREX24 portal using assistants.
Steps for remote maintenance of S7-MPI/PROFIBUS PLC.
Configuring the PG/PC interface for PLC access.
Adding the REX 300 router to the local connection settings.
Accessing the REX 300's MPI/PROFIBUS interface.
Configuring the Ethernet PLC to use the REX 300 router.
Selecting the appropriate VPN adapter for PLC access.
Connecting to and working with the PLC via VPN.
Steps to reset the REX 300 router to factory default settings.
Instructions for updating firmware via USB flash drive.
Explanation of the REX 300's LED indicators.
Detailed technical specifications of the REX 300 router.
To Next Page
