28
3: eDriveTC Operation
Manual Disengage
The eDriveTC can also be manually disengaged.
To manually disengage the eDriveTC:
1. Select a non-operational display (system) mode or menu.
2. Press the ENTER key.
Note: When operating in contour mode, the Outback guidance
controller’s free-style method continuously searches for a
previous pass to guide along. If no previous pass is found
nearby, the display will show LOGGING PASS, and the eDriveTC
is disabled. Once a previous pass has been detected, guidance
indicators will be displayed, and the eDriveTC
can be engaged.
In complex contour/terrace applications where multiple previous
passes exist nearby, the free-style method selects the closest
path. This can result in unexpected eDriveTC
auto-disengage,
and/or guiding along the wrong pass. To minimize this effect,
clear the Outback guidance controller’s guidance memory as
each sub-area is completed, particularly after making the
outside passes around the field.
To Next Page
Loading...
