5
Placing the Analyzer in the Docking
Station
FIGURE 1-5
Always slide the Analyzer into and out of the
Docking Station by means of the Tracks(1).
Make sure the Analyzer is fully inserted.
Never try to lift the Analyzer out of the
Docking Station or press the Analyzer
downwards into the Docking Station.
This may damage the casing and power
outlets of the Analyzer and/or the Docking
Station.
Remove the Analyzer if there is no
communication between the Analyzer and
the Docking Station and then re-dock the
Analyzer in the Docking Station.
1 Tracks
1
To Next Page
Loading...
Need help?
General
