6
2 General operations
This chapter describes the general operations necessary for Analyzer use.
2.1 Getting started –
Analyzer
Always follow the operating and storage
conditions listed under section Technical
Specifications. Allow the Analyzer to reach
operating temperature before use.
2.1.1 Power source
The Analyzer can be powered either by the
rechargeable Battery or by a standard
electrical outlet via the Power Adapter.
Recharging the Battery
FIGURE 2-1
The rechargeable Battery(1) is located in a
battery compartment on the bottom of the
Analyzer.
a) Recharge the Battery(1) by connecting
the Power Adapter to the Analyzer or by
placing the Analyzer in the Docking
Station that is connected to the Power
Adapter. New Battery will take longer to
charge the first 2 to 3 times.
1 Battery
1
To Next Page
Loading...
Need help?
General
