What does error code E-15 mean on a Henny Penny Fryer?
If your Henny Penny Fryer displays the error code “E-15”, it is related to the drain switch. Make sure the drain handle is completely turned to the close position. If the error persists, have the drain switch checked.
What does error code E-10 mean on a Henny Penny Fryer?
If your Henny Penny Fryer displays the error code “E-10”, it indicates a high limit issue. To resolve this, allow the heating elements to cool for 15-20 minutes. Then, reset the high limit by pressing down and releasing the raised side of the switch for the vat that is not operating. The switches are located behind the right door. If the high limit does not reset, the high limit must be replaced.
What does error code E-6B mean on a Henny Penny KVE-071?
If your Henny Penny Fryer displays the error code “E-6B”, it indicates that the temperature probe is shorted. To attempt to resolve this, turn the switch to the OFF position, and then turn it back to the ON position. If the display continues to show “E-6B”, the temperature probe should be checked.
What does error code E-6A mean on a Henny Penny KVE-071 Fryer?
If your Henny Penny Fryer displays the error code “E-6A”, it indicates that the temperature probe is open. To attempt to resolve this, turn the switch to the OFF position, and then turn it back to the ON position. If the display continues to show “E-6A”, the temperature probe should be checked.
Why is my Henny Penny KVE-071 Fryer filter motor running but pumping oil slowly?
If your Henny Penny Fryer's filter motor runs but pumps oil slowly, it could be due to loose filter line connections or a clogged filter paper or pad. Try tightening all filter line connections and changing the filter paper or pad.
What does error code E-5 mean on a Henny Penny KVE-071?
If your Henny Penny Fryer displays the error code “E-5”, it means that the oil is overheating. To attempt to resolve this, turn the switch to the OFF position, and then turn it back to the ON position. If the display continues to show “E-5”, the heating circuits and temperature probe should be checked.
What does error code E-4 mean on a Henny Penny KVE-071?
If your Henny Penny Fryer displays the error code “E-4”, it indicates that the control board is overheating. To attempt to resolve this, turn the switch to the OFF position, and then turn it back to the ON position. If the display continues to show “E-4”, check the louvers on each side of the unit for obstructions.
How do I fix the E-10 error code on my Henny Penny KVE-071 Fryer?
If your Henny Penny Fryer displays control error code “E-10”, it indicates an open high limit circuit. To fix this, allow the heating elements to cool for 15-20 minutes. Then, reset the high limit by pressing down and releasing the raised side of the switch for the vat that is not operating. The switches are located behind the right door. If the high limit does not reset, the high limit must be replaced.
General| Brand | Henny Penny |
|---|---|
| Model | KVE-071 |
| Category | Fryer |
| Language | English |
To Next Page