User Manual – 9/32
You should now install the VirtualDJ DJC Edition mixing software on your computer:
- In the installation menu, click Install VirtualDJ DJC Edition
and follow the on-screen instructions.
ENGLISH
The software is installed on your computer.
FRANÇAIS
- To l
aunch the VirtualDJ software on your Mac, go to Applications and then select VirtualDJ.
- Enter the VirtualDJ serial number, then click OK. The VirtualDJ serial number is indicated on a
sticker with a barcode found on the underside of your DJ Console Mk4. The VirtualDJ serial
number is in the following format: XXXX-XXXX-XXXXX/Mk4.
DEUTSCH
For more in
formation on configuring your DJ Console Mk4, please refer to chapter 5. The DJ
Console Mk4 control panel.
3.2. Connecting and disconnecting your DJ Console Mk4
NEDERLANDS
Your DJ Console Mk4 can be used in conjunction with another sound card, whether internal or
external, without creating conflicts on your computer.
Please note that in Windows operating systems, when you connect your DJ Console
Mk4, it becomes the system’s default sound card. The sound card previously set as the
default sound card becomes the default sound card again when you disconnect the DJ
Console Mk4.
ITALIANO
Therefore, once properly installed, you can connect and disconnect your DJ Console Mk4 at any
time, even when your computer is powered on, thanks to its USB hot-plug function (although you
should never do so when DJ Console Mk4 is playing or recording music, or else the application
will terminate and display an error message).
ESPAÑOL
To Next Page
Loading...
Need help?
General
