HermanMiller Eames Square - Step 1: Prepare Table Top; Invert Table Top; Align Top Casting; Secure Top Casting

HermanMiller Eames
®
Table Assembly Instructions2
1.2
Align top casting on table top.
Step 2
1.1
Invert table top on a clean, Padded surface.
Step 1
1.3
Insert (4) screws and tighten..
2.1
Thread jam nut completely onto one end of threaded rod untill jam nut will not turn.
2.2
Insert rod, jam nut down, and thread completely into top casting. Tighten jam nut against
top casting.
3.1
Place tube over rod onto top casting.
Step 3
4.1
For universal base only-place steel bushing over rod into tube.
Step 4