HermanMiller Eames Square - Step 5: Attach Base Casting; Align Base Casting; Step 6: Final Tightening; Assemble Washers and Torque Nut

HermanMiller Eames
®
Table Assembly Instructions3
5.1
Invert table base casting, casters/glides up, and plave over tube, making sure that base
casting legs are aligned approximately with top casting arms. ( for mobile table only, insert
casters into base).
Step 5
6.1
Assemble washer and lock washer onto threaded rod. Torque jam nut to minimum of 40 ft-lbs.
Step 6
7. 1
Place table in upright position and return to service.
Step 7