HermanMiller Sayl
®
Chair Adjustment Guide1
HermanMiller
Sayl
®
Chair
To raise seat:
Take your weight o chair, li tab up.
To lower seat:
While seated, li tab up.
At the proper height, your feet should rest flat on the floor.
Seat Height: Lever next to tilt tension knob, right side of chair
To increase depth:
Pull lever out, slide thighs forward to
adjust seat; release lever.
To decrease depth:
Pull lever out, push seat back and
release lever.
In the proper position, you will have approximately three-ngers of clearance
between the back of your knees and the seat edge.
Seat Depth: Lever under le side of seat
Only available on some models.
To increase tension:
Turn knob clockwise.
To decrease tension:
Turn knob counterclockwise.
Set the tilt tension to control the resistance you feel when leaning back.
Tilt Tension: Knob below right side of seat
To position chair forward:
Recline and flip lever down.
To resume horizontal position:
Recline and flip lever up.
Engage forward tilt to support the thighs’ declined posture when performing
intensive tasks such as keyboarding.
Forward Tilt: Front horizontal tab on le side of seat
Only available on some models.