•
After cleaning, rinse the vehicle thoroughly
with plenty of clean water. Strong detergent
residue can corrode alloy parts.
•
Dry the vehicle with pressurized air, start
the engine and let it run for several minutes.
NOTE
•
The inside of the headlamp lens may be
clouded immediately after washing the
vehicle. Moisture condensation inside the
headlamp lens will disappear gradually by
lighting the headlamp in high beam.
•
Take care to keep brake fluid or chemical
solvents off the vehicle. They will damage
the plastic and painted surfaces.
•
Test the brakes before riding the vehicle.
Several applications may be necessary to
restore normal braking performance.
TEST BRAKES
•
Braking efficiency may be temporarily
impaired immediately after washing the
vehicle.
•
Anticipate longer stopping distance to avoid
a possible accident.
52
•
Clean the plastic parts using a cloth or
sponge dampened with a solution of mild
detergent and water. Rub the soiled area
gently rinsing it frequently with fresh water.
To Next Page
Loading...
