ALARM MEMORY - 02
IN.1 28/07 22:45
ALARM MEMORY - 01
IN.4 09/08 11:13
Key [
▼
]
The most recent old alarm
While viewing the information related to the input, time and date of an alarm, the
numbers which have been called can be viewed by pressing [OK]:
Using the previous example, the inlet, time and date, are the following.
ALARM MEMORY - 04
IN.4 20/06 20:20
Press [OK] to view the first phone number been called. The arrow at the far bottom right
hand side, indicates that other phone numbers have been called.
Each phone number is memorised, if the number has been called in voice or in SMS
text message. In case of a voice call, the result of the call and the block, if any, of the
following calls will be reported. The viewing on INFORMA 600 phone dialler display is
the following:
“CALL.M01” means that the number in position 01 has been voice-called.
The space after the number called indicates the call result:
- an empty space means that the call result is not confirmed.
- “[OK]” indicates that the call has been successful
- “OFF” means that the user called has blocked the sequence of calls.
The sequence of calls can also be blocked through the user code entered with the
dialler key pad. In this case the “KEY PAD OFF” message is memorised. If the
sequence of calls is blocked by activating the relating input, the “INPUT OFF” message
will be memorised.
In the case of SMS text messages, only the phone number which receives the message
will be memorised and not the outcome of the message.
The viewing of the SMS message “M03” means that an SMS text message has been
sent to the phone number which is memorised at the 03 position.
Hereunder is a viewing example:
ALARM MEMORY IN.1 -03
CH. M.01 [OK]
INFORMA
600
-
Multifunction phone dialler with voice synthesis
19
To Next Page