Alarm memory input 1 with voice call made to the phone number memorised at the 01
position, with a successful call, the viewing of the arrows at the bottom far right hand
side, indicates that other phone numbers have been called, and can be viewed by
pressing [
▼
] :
MEM. ALL. IN.1 -03
SMS M.02
Alarm memory input 1, with an SMS text message sent to the phone number
memorised at the 02 position, the arrows at the far bottom left and right hand sides
indicate that there are other previous or subsequent events. Press [
▲
] to view the
previous event, and [
▼
] to view the subsequent one.
MEM. ALL. IN.1 -03
KEY PAD OFF
Alarm memory input 1 with a call block made by entering the user code on INFORMA
600 phone dialler key pad. Viewing the bottom arrow only, at the far left hand side,
means that there are previous events only.
Calls for failures are memorised in the same way too, and the only difference is that the
failure is memorised instead of the alarmed channel:
AG for GSM failure
AL for PSTN phone line failure
BS for low battery
CR for remaining credit
SS for SIM expiry
Summary of the alarm memory viewing
:
• To select an alarm you want to check at a specific time and date: press [
▲
]
and [
▼
], then press [OK].
• To trace down the phone numbers which been called, and have the relating
outcome and/or the SMS sent: press [
▼
].
• To move backwards: press [
▲
] to view previous phone numbers.
• To select another alarm: press [
▲
] and [
▼
] at any moment.
• To return to the main programming menu: press [CLR], while the alarm time
and date are viewed
20
INFORMA
600
-
Multifunction phone dialler with voice synthesis
To Next Page