2.1.3. Battery chargers
Battery charger UCH-2-AC or UCH-DC
The battery charger contains a processor to control and regulate
the whole charging process. Depending on the version it is
designed for operating voltages of 10-30 VDC or 90-270 VAC.
After inserting the battery, a yellow LED indicates the charging
process. When the battery is fully charged a green LED lights
up. When you switched to fast charge a red LED lights up
additionally. If no LED is shining after inserting battery
on power at charger the yellow LED is flashing continuously,
the battery is bad.
Version 1, VersaPak
(Fig. 9)
Version 2, HETRONIC MINI
(Fig. 10)
Version 3, HETRONIC GL
(Fig. 11)
To Next Page
Loading...
