EasyManua.ls Logo

HETRONIC CS 434 - Battery Handling Procedures

HETRONIC CS 434
32 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
2. Operation
Have you read and understood the operating instructions, in particular section
1 on safety and protection devices?
You may not
use the device until you have done so!
2.1. Handling non-rechargeable/rechargeable
batteries
Depending on the version, HETRONIC radio remote control systems either
come with a battery compartment for two or three 1.5 V alkaline mignon
batteries
or
with a HETRONIC rechargeable battery/battery charger set (12/24 VDC or
115/230 VAC depending on the transmitter type) and two HETRONIC
interchangeable batteries
or
with a VersaPak rechargeable battery/battery charger set (115 V AC or 230 V AC)
with two interchangeable VersaPak penlite batteries rated at 3.6 V each.
If your HETRONIC radio remote control system was
delivered with a battery compartment for alkaline mignon
batteries, never attempt to charge the battery
compartment with the alkaline batteries in a battery
charger!
Alkaline batteries are not capable of recharging; only
batteries specially designed for this purpose can be
recharged!

Related product manuals