2.5. Frequencies and addressing
Radio remote control systems from HETRONIC include a CS434, CS447 or
CS458 RF module synthesizer (not subject to registration), which incorporates
an RF transmitter module and an RF receiver module.
2.5.1. Frequency allocation for CS434
FREQUENCY ALLOCATION FOR CS434TXN
MANUAL
SETTING
AUTOMATIC SETTING
S1 = 0 S1 = 1
D2 = 1 = FCS (Free Channel Search TX), and SCAN-RX
D2 D3 D4 D5 D6 Frequency Channels D3 = 1 = AUTX (Automatic Channel Change TX), and SCAN-RX
0 0 0 0 0 433.1000 2
0 0 0 0 1 433.5500 20 Freq Group for FCS/AUTX/SCAN
0 0 0 1 0 434.0500 40 D4 D5 D6 Channels
0 0 0 1 1 434.0750 41 0 0 0 68, 58, 54, 52, 49, 41
0 0 1 0 0 434.1000 42 0 0 1 67, 59, 55, 53, 47, 44
0 0 1 0 1 434.1250 43 0 1 0 66, 64, 61, 57, 51, 43
0 0 1 1 0 434.1500 44 0 1 1 65, 63, 60, 56, 50, 42
0 0 1 1 1 434.1750 45 1 0 0 38, 32, 28, 18, 10, 8, 5
0 1 0 0 0 434.2000 46 1 0 1 37, 29, 25, 23, 17, 14, 4
0 1 0 0 1 434.2250 47 1 1 0 36, 34, 31, 27, 21, 13, 3
0 1 0 1 0 434.2500 48 1 1 1 35, 33, 30, 26, 20, 12, 2
0 1 0 1 1 434.2750 49
0 1 1 0 0 434.3000 50 If FCS is selected,
0 1 1 0 1 434.3250 51 the module will remember the last frequency that is set and then the
0 1 1 1 0 434.3500 52 frequency change is made by pushing the decrement switch button.
0 1 1 1 1 434.3750 53 FCS on the transmitter module will only work with decrement switch
button.
1 0 0 0 0 434.4000 54
1 0 0 0 1 434.4250 55 In AUTX mode, the TX module will remember the last frequency
1 0 0 1 0 434.4500 56 and then it will automatically decrement the channel everytime
1 0 0 1 1 434.4750 57 it is cycled On-Off-On.
1 0 1 0 0 434.5000 58
1 0 1 0 1 434.5250 59 In both, AUTX and FCS mode, the decrement switch button is
1 0 1 1 0 434.5500 60 always active.
1 0 1 1 1 434.5750 61 Thus, the user can change the frequency by pushing the button.
1 1 0 0 0 434.6000 62
1 1 0 0 1 434.6250 63
1 1 0 1 0 434.6500 64
1 1 0 1 1 434.6750 65
1 1 1 0 0 434.7000 66
1 1 1 0 1 434.7250 67
1 1 1 1 0 434.7500 68
1 1 1 1 1 434.7750 69
Maximum power is 10mW ERP, 100% duty cycle in
Europe
Maximum power is 1mW ERP, 100% duty cycle in
Europe