Operating time: 14 - 20 hours (continuous operation), according to
the system
Pushbuttons: One or two-stage
Master switch/joystick: All master switches have an automatic reset
function, multiple-steps and proportional, are
moisture resistant and ergonomically designed
6.4. Receiver:
Housing material: Fiberglass-based polyamid with 30% glass fibre
rate, according to the system
Other materials available upon request
Connection: Via moisture resistant connecting plug
Protection class: IP 65
Operating voltage: 9 - 30 VDC, 48/110/220 VAC
Weight: < 7.2 kg
Current consumption: < 0.8 A
Aerial: External aerial, with moisture resistant
connection, partly internal
Digital outputs: Fail-safe and self-monitoring
EMERGENCY/STOP circuit. All relay outputs
275 VAC/8A
Proportional resolution: 8-bit (256 increments per function)
Built-in ramp function selectable
Proportional outputs: PWM signal with selectable dither frequency and
current range
Linear output voltage
Proportional functions set via the transmitter (with
quick set properties) or via potentiometer
Multiple speed ranges selectable
All proportional functions can be set with initial
and final speeds
Serial interfaces - RS232, RS458, CAN bus,
Profibus
6.5. Standard options:
Proportional or digital feedback with or without
display, 45° inclination sensor switch with
configurable time delay in transmitter, dead man’s
master switch, interlocking of individual functions,
mechanical dead man, optical and acoustic
undervoltage display 10 minutes in advance, one
transmitter for multiple receivers, tandem
operation, replacement transmitter, radio remote
controls for explosion-protected areas
To Next Page
Loading...
