6. Technical data
6.1. General:
Frequency range: 400 - 470 MHz
Other frequency ranges available on request
RF synthesizer: Microprocessor-controlled PLL synthesizer with
32 selectable frequencies
RF output: <10 mW standard
Higher transmitter outputs available on request
RF certifications: Certified for frequency ranges subject to approval
and freely assignable frequency ranges in over
40 states
Modulation: FM - narrow bandwidth
Bandwidth: 12.5 kHz/25 kHz according to the system
Range: Approx. 100 meters (with standard aerial)
Approx. 200 meters (with special aerial)
Addressing: 20-bit (over 999,999 individual options)
Temperature range: -25 °C - +70 °C (-18 °F - +160 °F)
Resistance to moisture: 0 - 97 % max. (applies only for
condensation)
Response time: Approx. 55 ms
Baud rate: 2,400/4,800 bps
Main components: Surface mounting, modular construction
Diagnosis: Status displays for RF communication;
operating voltage displays for transmitter and
receiver; undervoltage display
Certificates: CE, TÜV, ISO 9001 to name a few
6.2. Rechargeable batteries and battery charger:
Operating voltage: 9 - 30 VDC or 110/230 VAC
Charging time: Approx. < 4 hours
Service life: Approx. 900 charges
Type: NiCd or NiMh (depending on version)
Capacity: 600 mAh/1,200 mAh (depending on version)
Contacts: Gold-plated, self-cleaning contacts
6.3. Transmitter:
Type: Ergonomically-shaped housing
Housing material: Fiberglass-based polyamid with 30% glass fibre
rate, according to the system
Other materials available upon request
Protection class: IP 65
Weight: Less than 2.00 kg (including non-rechargeable
batteries or rechargeable battery), according to
the system
Aerial: Internal
Non-rechargeable or rechargeable
battery housing: Electrically separated with gold-plated, self-
cleaning contacts
To Next Page
Loading...
