Hettich EBA 200 S - 5 Technical Specifications

EN
44/138
5 Technical specifications
Manufacturer
Andreas Hettich GmbH & Co. KG
D-78532 Tuttlingen
Model EBA 200 EBA 200 S
Type 1800 1800-01 1802 1802-01
Mains voltage ( 10%) 200 - 240 V 1 100 - 127 V 1 200 - 240 V 1 100 - 127 V 1
Mains frequency 50 - 60 Hz- 50 - 60 Hz 50 - 60 Hz- 50 - 60 Hz
Connected load 100 VA 100 VA 160 VA 160 VA
Current consumption 0.5 A 1.0 A 0.75 A 1.5 A
Max. capacity 8 x 15 ml
Allowed density
1.2 kg/dm
3
Speed (RPM) 6000 8000
Force (RCF) 3461 6153
Kinetic energy 750 Nm 1750 Nm
Obligatory inspection (BGR 500) no
Ambient conditions (EN / IEC 61010-1)
 Set-up site
Indoors only
 Altitude
Up to 2000 m above sea level
 Ambient temperature
2°C to 40°C
 Humidity
Maximum relative humidity 80% for temperatures up to 31°C, linearly
decreasing to 50% relative humidity at 40°C.
 Excess-voltage category
(IEC 60364-4-443)

 Pollution degree
2
Device protection class

Not suitable for use in explosion-endangered areas.
EMC
 Emitted interference,
Interference immunity
EN / IEC
61326-1,
Class B
FCC Class B EN / IEC
61326-1,
Class B
FCC Class B
Noise level (dependent on rotor)
 50 dB(A)  55 dB(A)
Dimensions
 Width
261 mm
 Depth
353 mm
 Height
228 mm
Weight approx. 9 kg approx. 11 kg