Why does my Hettich Laboratory Equipment show ° C * -ERROR 52.0, 52.1?
If your Hettich Laboratory Equipment displays '° C * -ERROR 52.0, 52.1', it indicates overtemperature in the centrifuging chamber or an error/defect in electronics. Perform a MAINS RESET.
What does ° C * -ERROR 51, 53-55 mean on Hettich Laboratory Equipment?
If your Hettich Laboratory Equipment displays '° C * -ERROR 51, 53-55', it indicates an error or defect in the electronics. Perform a MAINS RESET.
How to fix no display on Hettich rotina 380?
If your Hettich Laboratory Equipment displays 'No display', first check the power supply. Also, check the over-current protection fuse. For types 1701-01 and 1706-01, verify the automatic circuit breaker. Set the mains switch to [I].
What to do if Hettich rotina 380 Laboratory Equipment shows CRC ERROR 27, 27.1?
If your Hettich Laboratory Equipment displays 'CRC ERROR 27, 27.1', it indicates an error or defect in the electronics. Perform a MAINS RESET.
How do I troubleshoot CONTROL-ERROR 25.1-25.4 on Hettich rotina 380 Laboratory Equipment?
If your Hettich Laboratory Equipment displays 'CONTROL-ERROR 25.1-25.4', it indicates an error or defect in the electronics. To resolve this, perform a MAINS RESET.
What does VERSION-ERROR 12 mean on Hettich rotina 380?
If your Hettich Laboratory Equipment displays 'VERSION-ERROR 12', it indicates a lack of conformity of the electronic components or an error/defect in the electronics. To attempt a fix, perform a MAINS RESET.
How to resolve ROTORCODE 10.1-10.3 error on Hettich Laboratory Equipment?
If your Hettich Laboratory Equipment displays 'ROTORCODE 10.1-10.3', it indicates a rotor coding error. To resolve this, perform a MAINS RESET.
What causes N < MIN 13 on Hettich rotina 380 and how to fix it?
If your Hettich Laboratory Equipment displays 'N < MIN 13', it indicates an underspeed error. To resolve this, perform a MAINS RESET.
How do I fix CONTROL-ERROR 4.1-4.5, 6 on Hettich rotina 380 Laboratory Equipment?
If your Hettich Laboratory Equipment displays 'CONTROL-ERROR 4.1-4.5, 6', it indicates a lid lock error. Perform a MAINS RESET to resolve this.
What does N > ROTOR MAX mean on Hettich rotina 380?
If your Hettich Laboratory Equipment displays 'N > ROTOR MAX', it means the speed in the selected program is greater than the maximum rotor speed. Check and correct the speed setting.
General| Type | Centrifuge |
|---|---|
| Maximum Speed | 15, 000 rpm |
| Maximum RCF | 24, 400 x g |
| Power Supply | 220-240 V, 50/60 Hz |
| Dimensions (W x D x H) | 554 x 706 x 375 mm (Rotina 380), 554 x 706 x 375 mm (Rotina 380 R) |
To Next Page