How to troubleshoot TACHO-ERROR 1, 2, 96 on Hettich rotina 380 Laboratory Equipment?
If your Hettich Laboratory Equipment displays 'TACHO-ERROR 1, 2, 96', it could be due to a defective tacho, motor, or electronics. To attempt a fix, open the lid, set the mains switch to [0], wait at least 10 seconds, turn the rotor vigorously by hand, and then set the mains switch to [I]. The rotor must rotate while switching on.
What does MAINS INTERRUPT 11* mean on Hettich rotina 380 Laboratory Equipment?
If your Hettich Laboratory Equipment shows 'MAINS INTERRUPT 11*', it indicates a loss of mains power during the centrifugation run, meaning the run was not completed. To address this, open the lid and press the [START] button. If necessary, repeat the centrifugation run.
What to do if Hettich Laboratory Equipment shows IMBALANCE 3*?
If your Hettich Laboratory Equipment shows 'IMBALANCE 3*', it means the rotor is unevenly loaded. To resolve this, open the lid, check the rotor loading, and then repeat the centrifugation run.
General| Type | Centrifuge |
|---|---|
| Maximum Speed | 15, 000 rpm |
| Maximum RCF | 24, 400 x g |
| Power Supply | 220-240 V, 50/60 Hz |
| Dimensions (W x D x H) | 554 x 706 x 375 mm (Rotina 380), 554 x 706 x 375 mm (Rotina 380 R) |
To Next Page