1
Grounded
Outlet Box
Grounding
Pin
Grounded
Outlet
WARNING: TO REDUCE THE RISK OF
BURNS, FIRE, ELECTRIC SHOCK, OR
INJURY TO PERSONS:
• WARNING: Risk of Electric Shock – Connect
this furnishing to a properly grounded outlet
only. See Grounding Instructions.
• Each surface intended to support a load shall
have a corresponding statement in the user
instructions specifying the maximum intended
load for that surface in pounds (kilograms)
• WARNING: Risk of instability, ‘Cover’ Max 101
lbs load, ‘Upper main frame’ 22 lbs load.
• WARNING: Risk of fire and shock, Use only
SJT type 14 AWG cord.
GROUNDING INSTRUCTIONS:
This product is for use on a nominal
120-volt circuit and has a grounding plug
that looks like the plug illustrated below.
Make sure that the product is connected
to an outlet having the same
configuration as the plug. No adapter
should be used with this product.
IMPORTANT SAFETY
INSTRUCTIONS
WHEN USING AN ELECTRICAL
FURNISHING, BASIC PRECAUTIONS
SHOULD ALWAYS BE FOLLOWED,
INCLUDING THE FOLLOWING:
Read all instructions before using this
furnishing.
The Hexcal Studio contains high-tech,
sensitive components; therefore, please
ensure that the product is not dropped. Do
not paint, burn, or disassemble your Hexcal
Studio. If your product is damaged through
misuse or abuse, it will not be covered under
your warranty.
To Next Page
Loading...