User manual- HXE310-KP
20
2.4.4 Cancellation of registration
Should the Utility or the end user have a requirement to remove the meter or change the
meter, the registration of the meter could be canceled in the following manners:
When a cancellation is processed on the Engineering token generation (or Vending)
System a 20 digit cancellation token is generated.
The User would enter this 20-digit token and press the enter button.
Should this token be successfully accepted the meter will return a 20-digit refund token
and this will be displayed over 3 scrolling screens. Each screen will be displayed for 10
seconds to allow the user sufficient time to record it in writing. For example:
The user would then return this token to the Utility Vending Station or Engineering Station.
If it is accepted the system will write off the meter and refund the balance.
The cancellation token can be inquired by stroking 818.
2.5 Short Codes
There are series of short codes available for customer to easily retrieve information from the
meter.
The Customer can input three codes as a short cut key as follows
To Next Page
Loading...
