© 2010 HID Global Corporation All rights reserved
Section 3: Print Driver Installation
This section describes the Printer Driver installation requirements and standard procedures.
Requirements are listed below. The DTC4500 Print Driver supports the following:
• Vista, 32 bit Windows OS,
• Windows XP
• Server 2003
• Vista, 64 bit Windows OS
• Linux OS (Ubuntu7.10, Red Hat Enterprise Desktop 5, Fecora Core 7 & 8, openSUSE 10.3 , open
NOVELL SUSE 10.). Contact HID/Fargo Technical Support for the driver.
Driver Installation Instructions
Start the installation process by inserting the Driver CD into the computer. Then, follow the Installaware
Wizard screen prompts.
• Select 32 bit Windows or 64 bit Windows to start the installation.
• Select the Fargo Workbench Utility Program to install this program.
• Specific versions of Windows require Administrator rights.
• From the Printer & Faxes folder, open the Printing Preferences to setup the Driver after it has been
installed.
• Printing Preferences need to be setup after the Driver has been installed. Each TAB is shown in the
next section.
• Use the drop down arrows to select the correct options for each printing preference.
DTC4500 Card Printer/Encoder User Guide
28
To Next Page
Loading...
