© 2010 HID Global Corporation All rights reserved
Section 7: Troubleshooting
Printer Error Button and Display Message Table
Both the DTC4500 use the Button messages rather than the Display Message system.
Step Procedure
1
All Printers have two (2) buttons, one for ON/Off (LEFT) and one for Pause (II)
(RIGHT).
2 The ON/Off button is blue when the Printer is ON. When the Printer enters the
Sleep Mode, the LED is dimmed but still ON.
3 The Pause (II) button will be illuminated blue when the Printer is capable of
accepting a printjob and does not have an error.
• This LED will continue to stay on while the Printer prints as long as there is
no error.
• This LED will also be dimmed when the Printer goes into sleep mode.
4 When an error occurs, the Pause button will no longer be illuminated blue, but
will blink red.
DTC4500 Card Printer/Encoder User Guide
78
To Next Page
Loading...
