What does '#202 Encoder not installed' mean on HID Printer?
You are trying to send encoding data, but the Printer is not configured with this Encoder type (iCLASS, Prox, MIFARE, SmartCard). Ensure that no encoding data is being sent with the print job and reprint the card. Install an encoding module.
What to do if my HID Printer displays '# 68 Card in Printer'?
A card is jammed in the print station or card flipping area of the printer. Clear the jam, then press the Pause button to continue printing.
How to troubleshoot '# 30 Mag Verify Error' on HID Printer?
Magnetic encoding verification has failed. Try encoding with a different card. Verify cards have the magnetic stripe. Replace the magnetic encoding module.
What to do if my HID Printer says '# 25 Ribbon not Installed'?
No ribbon is installed in the printer. Install a ribbon and retry.
What does '# 100 Ribbon RFID Error' mean on my HID Printer?
There is no ribbon or the ribbon tag information is corrupted or incorrect. Verify the printer driver settings for correct Ribbon. Try a new ribbon and continue. Press the ON/OFF button to cancel.
How do I resolve a '# 97 Ribbon Search Error' on my HID Printer?
The ribbon is not able to find the next panel correctly. Check for jams/breaks. Recalibrate the ribbon sensor. If broken, repair by taping the ribbon back on to the take- up core. Replace the ribbon. Press the Pause button to continue or the ON/OFF button to cancel.
How to fix '# 99 Ribbon Error' on my HID Printer?
The print ribbon has either broken or jammed. If jammed, clear the jam. If broken, repair it by taping the ribbon back on to the take- up core. Press the Pause button to continue or the ON/OFF button to cancel.
Why does my HID Printer say '# 70 Multiple Feed'?
Multiple cards were fed into the printer. First, verify the card thickness is set to the thickness of your cards, then press the Pause button. Check for card slippage. If necessary, run the printer cleaning routine. Verify the cleaning roller is properly installed on the ribbon cartridge. Verify the cards are not sticking together.
What to do if my HID Printer shows '# 93 Wrong Ribbon' error?
The print ribbon installed in the printer does not match the ribbon type selected in the printer driver. To resolve this, either change the installed print ribbon to match the driver settings, or adjust the ribbon type selected in the printer driver. Press the Pause button to continue or the ON/OFF button to cancel.
What to do if my HID Printer says '# 91 Ribbon Out'?
The print ribbon has run out. Install a new ribbon. Press the Pause button to continue printing, or the ON/OFF button to cancel the print job.
To Next Page
General