104 September 2018
Ethernet option PLT-02931, Rev. A.0
How do I choose a static IP address
for my printer?
Use the Network Settings page if you know the current IP address.
The printer also allows you to save the current network settings as static settings
using the printer display menu (Network Settings > TCP/IP ), and then switch
DHCP (dynamic IP address selection) to DISABLED.
Note: You can save static addresses. However, they are not used until you
reconfigure the printer to use those static addresses and reboot the printer.
What do the LEDs by the Ethernet
connection on the back of the
printer indicate?
The green LED indicates a valid Ethernet connection.
The amber LED indicates network activity.
How do I print a test page from
Windows to verify the Ethernet
configuration of the printer and
printer driver?
This varies by the level of Microsoft Windows you are running. In general,
1. Open the Windows Settings page.
2. Select Settings > Devices > HDP6600 Card Printer > Manage > Printer
Properties.
3. Select the General tab.
4. Ensure that the printing preferences are set correctly for the ribbon
installed in your printer. Then select Print Test Page.
Question Answer
To Next Page
Loading...
