September 2018 47
PLT-02931, Rev. A.0 Printing preferences
Device Settings
Menu option Description
Color Intensity Controls the overall darkness and lightness of the printed color.
Dye-Sub (YMC): This slider controls the overall darkness and lightness of the dye-sub printed
image. Any adjustments only affect those images printed with dye-sublimation (YMC-type)
ribbon panels.
႑ Moving the slider to the left causes less heat to be used; the prints are lighter.
႑ Moving the slider to the right cause more heat to be used; the prints are darker.
Resin (K): The heat is controlled for both front and back of cards. This control can be helpful
for fine-tuning the sharpness of resin text and bar codes.
This slider controls amount of heat the printer uses when printing with the resin black panel.
႑ Moving the slider to the left causes less heat to be used; the resin images are lighter or
less saturated.
႑ Moving the slider to the right causes more heat to be used; the resin images are darker
or more saturated.
Default: Returns the listed percentages to the factory settings.
To Next Page
Loading...
