Highland Supercell - Electrical Safety

8
ELECTRICAL SAFETY
Supercell is baery powered and there is no requirement to carry out in-service electrical
tesng. However, baeries in equipment can potenally fail and cause res. Supercell must be
visually inspected for damage before each use.
The operator should carry out a visual inspecon of Supercell every me it is used. If the case
is split or broken, or any connectors are damaged, then the equipment must not be used, and
it should be returned to your distributor for immediate repair.
The wall powered charger requires addional tesng and is subject to both a visual inspecon
and an in-service electrical test.
The operator should carry out a visual inspecon on the charger every me it is used.